UV DTF Transfer Application Instructions
Please note that used wraps cannot be returned, and we will not accept returns or issue refunds for damaged wraps due to incorrect application. By placing an order, you agree to these terms.
Follow these steps for a successful application:
Ensure that the glass is clean.
Carefully peel off the film from the back of the design.
CAUTION: Take care to align the wrap on the cup or surface as the adhesive is very strong. Do not attempt to remove the wrap once it touches the surface, as it may result in damage.
Place the design film on the glass cup.
Use a squeegee to work from the center outwards, pushing out any bubbles.
Rub the surface of the wrap thoroughly.
Slowly peel off the clear film. Ensure that the design is sticking to the surface. Fast peeling may result in damage.
If the design is not sticking, re-lay the film and continue rubbing before proceeding with peeling.
Leave the wrap on the cup or surface for at least 24 hours to allow the glue to cure. If there is excess glue, it can be removed with soap and water after 24 hours.